GSP1101 VERSION C51



As usual this version has not been fully tested

Here is the Windows Updater for the GSP1101 beta version C51
Be sure to use the 'RESET LVLS ON RESTORE' option in the main menu when you restore from vC48
The user cabs stereo bug is fixed. This will fix things like the bad ping pong.
Before downloading a user cab change the cabinet selection to one of the user cabs.

Here is the zip file for the Windows X-Edit beta version for GSP1101 vC50 - vC51



GSP1101's signal flow diagram  Updated on 9/8/10

You can download impulse responses for use as modeled cabinets to your GSP1101
The app has been updated to include stereo IRs.
Here is the Windows app JUserCabUpdater.exe, see the DownloadingUserCabs.txt file

You can create a startup screen bitmap and download it to customize your GSP1101
Here is the zipped folder, see the Readme.txt file in the folder



The pan controls on some of the modulation, delay and reverb modules have been replaced with output level controls.
This was needed to be able to create two completely separate signal paths (left and right).




Version C51

2.0 C51 changed text from 'RESET LVLS ON BACKUP' to 'RESET LVLS ON RESTORE'
fixed pitch effect's post dry level for restore (with 'RESET LVLS ON RESTORE' is on)
added 'LPF to XLR' default when changing cabs
fixed user cab right output (was outputing the left channel on the right channel)
'LPF to XLR' is now disabled when the cabinet is bypassed
post compressor's inputs are now summed
added 6dB to the makeup gain of the compressors
note to users: don't use acoustic amp if loop select = 'int - ext' and the ext amp is mixed with the internal amp



Version C50

2.0 C50


Changed "CC TEMPO" to "CC/GLOBAL TEMPO"
delay times now have the option of displaying in BPM
Display the bank name on the front panel
replaced Whammy/IPS with the latest DSP version
downloadable cabs are ready, 128 taps per left/right
updated x-edit for BPM display and user cabs
fixed extra gain when using the stompbox as a 3 band eq
increased gain for post fx envelope filter
fix for ips scales major and harmonic minor
whammy/ips pan controls now pan wet and dry, mix control is changed to crossover
Don't use tuner's pedal position after exiting the tuner (global option)
Switch back and forth to preset 99 when bypass is pressed (global option)
latest hardwire tuner is in
input meter follows ng/whammy detector, see wizard 5
new byp bounce locks out tuner entry while in preset 99 (defaults to normal bypass while X-Edit is running)
MIDI preset output map is in 'MIDI/CONTROLLERS' menu (X-Edit bulk dumps recognize this map but there is no menu/display for it)
fixed bulk dump for new global params: tuner vol upd, input meter, bypass bounce
fixed XLR outputs: post volume did not work when direct cabinet was selected, also fixed XLR user cabs
changed mod, dly, rvb's output controls from pans to levels
and added input levels which are set to 0 when the output level is 0
changed pitch effects level control to be a wet/dry crossover mix
changed the defaults for left controls when receiving older versions of bulk dumps
fixed pitch effects parameters for gui effect's defaults and user defaults
added new parameter to the amp menu for enabling/disabling the low pass filter
added global option to force post amp levels to 99 during a GUI preset load or bulk dump
new user cab downloader app, fixes 'cancel' bug
new X-Edit for cabinet enabling/disabling of the low pass filter
the reset of post levels during bulk and preset dumps now turns off after a bulk dump (does not turn off after a preset dump)
added 100ms delay after the 127 is sent but before the 0 is sent in "RCV CC on/off" mode and not merging and only for CC tap tempo
tweaked input meter: top of display is -3dB, at -1dB a little tick mark is made next to the top row
fixed user cab download app to accept stereo IR files and extra 'PAD ' etc. chunks
added default for new param 'enable LPF to XLR' for bulk restores


To use the cabinet downloader:
  1) download and run the app (link is above)
  2) connect USB
  3) click next until you see the gain/position screen
  4) enter the gain you want, more negative decreases overall cabinet gain
  5) enter the position you want the cabinet to go into (1 to 10)
     If you are auditioning the cabinet then the position doesn't matter
  6) select 'permanent' if you want to keep the cabinet else it will only be temporary
     making a cabinet permanent takes a unit restart
     you can download several cabs at once then set the 'permanent' box once on the last download
  7) click next and wait for it to finish downloading
  8) you can now download another cab without relaunching the app
  9) you may want to try the parameter to enable/disable a low pass filter (xlr only unless wizard 3) in the amp module menu


Version C48

2.0 C48
fixed synthtalk's default left/right levels
fixed memory coruption when naming a bank
took out limit for the USB playback mix
loop send (distortion or amp) always sends distortion if the loop type is not FX LOOP


Version C47

2.0 C47 fix for x-edit "ASSIGN MAX" error message, 4/17/09















Previos release
Here is the version notes and updater for the GSP1101 beta version C50

X-Edit beta versions and news

DigiTech version release
Here is the Windows Updater for the GSP1101 version 2.0
You can also get this from digitech.com